Capabilities

MISSION STATEMENT

IFPC constantly strives to deliver materials and services that produce customer satisfaction by meeting or exceeding specifications and expectations of quality, health, safety, and environmental protection.

CERTIFICATIONS

• Abrasive Blasting
  • SSPC-SP 5/NACE No. 1 White Metal Blast Cleaning
  • SSPC-SP 6/NACE No. 3 Commercial Blast Cleaning
  • SSPC-SP 7/NACE No. 4 Brush-Off Blast Cleaning
  • SSPC-SP 10/NACE No. 2 Near White Metal Blast Cleaning
  • SSPC-SP 14 Industrial Blast Cleaning
  • SSPC-SP16 Brush-Off Blast Cleaning of Coated & Uncoated Galvanized Steel, Stainless Steel and Non-Ferrous Metals
• UHP Water Blasting
  • SSPC-SP WJ-1/NACE WJ-1 Waterjet Cleaning of Metals – Clean to Bare Substrate
  • SSPC-SP WJ-2/NACE WJ-2 Waterjet Cleaning of Metals – Very thorough Cleaning
  • SSPC-SP WJ-3/NACE WJ-3 Waterjet Cleaning of Metals – Thorough Cleaning
  • SSPC-SP WJ-4/NACE WJ-4 Waterjet Cleaning of Metals – Light Cleaning
• Painter Certifications
  • SSPC C6 Applicator Certification
  • SSPC C12 Spray Paint Certification
  • SSPC C7 Abrasive Blaster Certification
  • SSPC C13 Waterjetting Certification
• Thermal Spray Certifications
  • SSPC QP6 Metalizing
• Wet Abrasive Blasting
  • SSPC-SP 5 WAB/NACE WAB-1 White Metal Wet Abrasive Blast Cleaning
  • SSPC-SP 6 WAB/NACE WAB-3 Commercial Wet Abrasive Blast Cleaning
  • SSPC-SP 7 WAB/NACE WAB-4 Brush-Off Wet Abrasive Blast Cleaning
  • SSPC-SP 10 WAB/NACE WAB-2 Near White Metal Wet Abrasive Blast Cleaning
  • SSPC-SP 14 WAB/NACE WAB-8 Industrial Wet Abrasive Blast Cleaning

WELD & BRAZE

The following Procedures and/or Work Instructions are Approved by NAVSEA & Accepted by ABS

• Welder Workmanship Qualification Procedure
• Braze & Filler Metal Control Procedure 
• FCAW S11A-1 Ceramic Backing
• FCAW S1-S8 Approved SMAW S11A-1
• SMAW S1-S8 (Awaiting Stamped Copy; Verbally Accepted)
• Manual Brazing and Testing

Procedural Capabilities Based on Approvals Shown Above are as Follows:

• FCAW Plate with and without backing (ceramic or steel) and Pipe Grove to include Weld Buildup up to 1″ and Edge Seal Weld Capabilities
  • Pipe Socket Weld Thickness Range 3/16″ and Greater
  • Carbon Steel to Carbon Steel in any combination w/in base metal thickness range of 1/8″ through 1″ OSS ESS HSS HY-80 HSLA-80
  • Austenitic Stainless Steel to Carbon Steel S1/S2 Series Cres 304/304L or 316/316L to OSS ESS HSS Hy-80 HSLA-80

• SMAW
  • Plate with and w/out backing (ceramic or steel) and Pipe Grove to include Weld Buildup up to 1″ and Edge Seal Weld Capabilities Pipe Socket Weld Thickness Range 3/16″ and Greater
  • Carbon Steel to Carbon Steel in any combination w/in base metal thickness range of 1/8″ through 1″ OSS ESS HSS HY-80 HSLA-80
  • Austenitic Stainless Steel to Carbon Steel S1/S2 Series Cres 304/304L or 316/316L to OSS ESS HSS Hy-80 HSLA-80
• IFPC Internal Procedures not governed by NAVSEA Qualification due to there being no requirement based on S9074-AQ- GIB-010/248:
• GTAW SMAW & FCAW when utilization pertains to non-structural applications such as ventilation, furniture, handrails, gratings etc., of the following base metal combinations is: Aluminum, CRES, and Carbon Steel in any compatible combination

• Brazing of the following Pipe Material Groups: P-101, P-102, P-107, P-108, P-110, P-111

Consisting of the following Base metals: Carbon Steel, Stainless Steel, Copper, Brass, Copper Nickel, Bronze         

 Aluminum Bronze, Manganese Bronze, Nickel Copper, and Nickel Chromium

• Certified in LOK Ring Installation Process and Tooling Use

SHOP AND SHIPBOARD

• Ship fitting
• Sheet metal
• Welding
• Pipefitting
• Electrical
• Rigging